THS3121IDGNG4
| Parameters | |
|---|---|
| Base Part Number | THS3121 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 8.5mA |
| Power Dissipation | 1.71W |
| Slew Rate | 1700V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 490mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 130MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 130000 kHz |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 11 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 66MHz |
| Bias Current-Max (IIB) @25C | 9.5μA |
| Programmable Power | NO |
| Max I/O Voltage | 8mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.71W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
THS3121IDGNG4 Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. This is a Current Feedback type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. As long as the supply current of the chip does not exceed 7mA, this op amp ic can operate. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1.
THS3121IDGNG4 Features
8 Pins
supply voltage of 5V
THS3121IDGNG4 Applications
There are a lot of Texas Instruments THS3121IDGNG4 Instrumentational OP Amps applications.
- Automotive sensors
- Large motor controllers
- earphone
- Wireless base stations
- Subtraction operation circuits
- Automation control systems
- Automatic control
- Integrator circuits
- High/low-pass filter circuit
- Measurements of Wheatstone bridge
