THS3122CDDA
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS3122 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 8.4mA |
| Nominal Supply Current | 21mA |
| Power Dissipation | 1.87W |
| Slew Rate | 1550V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 440mA |
| Input Offset Voltage (Vos) | 4.4mV |
| Bandwidth | 160MHz |
| Gain Bandwidth Product | 138MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 138000 kHz |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 53dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Settling Time | 64 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 126MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 10mV |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.87W |
| Terminal Position | DUAL |
THS3122CDDA Overview
The linear amplifier is packaged in a 8-PowerSOIC (0.154, 3.90mm Width) case. An op amp ic of the Current Feedback type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, op amp rates 4.4mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 8.4mA . For the operating supply voltage of the op amp ic, there is a rating of 2.
THS3122CDDA Features
8 Pins
supply voltage of 15V
THS3122CDDA Applications
There are a lot of Texas Instruments THS3122CDDA Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Medical imaging
- Portable media players
- Proportional counter tubes
- Industrial applications including automation
- Polarized electrodes
- Weak signal detection
- earphone
- Signal operation
- Automotive sensors
