THS3122ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.32W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS3122 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 8.4mA |
| Nominal Supply Current | 21mA |
| Power Dissipation | 1.32W |
| Slew Rate | 1550V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 440mA |
| Input Offset Voltage (Vos) | 4.4mV |
| Bandwidth | 160MHz |
| Gain Bandwidth Product | 138MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 138000 kHz |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 53dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Settling Time | 64 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 126MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 6mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3122ID Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the Current Feedback type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 4.4mV voltage. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . A supply current of 8.4mA can be used to operate this linear amplifier. The op amp is rated for an operating supply voltage of 2.
THS3122ID Features
8 Pins
supply voltage of 15V
THS3122ID Applications
There are a lot of Texas Instruments THS3122ID Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Large motor controllers
- RF cable systems
- Weighing systems
- Blood pressure sensors
- Power transmission
- Video computer boards
- Integrator circuits
- Signal filtering
- Portable docking station
