banner_page

THS3125CPWP

440mA per Channel 6μA 58 dB Instrumentational OP Amps 10V~30V ±5V~15V THS3125 14 Pins 14-PowerTSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-THS3125CPWP
  • Package: 14-PowerTSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 836
  • Description: 440mA per Channel 6μA 58 dB Instrumentational OP Amps 10V~30V ±5V~15V THS3125 14 Pins 14-PowerTSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 14-PowerTSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 14
Weight 58.003124mg
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Max Power Dissipation 3.3W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Base Part Number THS3125
Pin Count 14
Number of Elements 2
Operating Supply Current 8.4mA
Nominal Supply Current 21mA
Power Dissipation 3.3W
Slew Rate 1550V/μs
Amplifier Type Current Feedback
Common Mode Rejection Ratio 58 dB
Current - Input Bias 6μA
Voltage - Supply, Single/Dual (±) 10V~30V ±5V~15V
Output Current per Channel 440mA
Input Offset Voltage (Vos) 10mV
Bandwidth 160MHz
Gain Bandwidth Product 138MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 138000 kHz
Power Supply Rejection Ratio (PSRR) 53dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 16.5V
Voltage - Input Offset 4.4mV
Settling Time 64 ns
Low-Bias NO
Micropower NO
-3db Bandwidth 126MHz
Programmable Power NO
Neg Supply Voltage-Max (Vsup) -16.5V
Max I/O Voltage 10mV
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

THS3125CPWP Overview


Packaged in a 14-PowerTSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Current Feedback-type. There is a Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 14 terminations. In this case, there are 14 pins on the board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 14 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 10mV. For this electronic part, it is recommended that you mount it with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . You can run this op amp ic on 8.4mA . A total of 2 elements are present in this linear amplifier.

THS3125CPWP Features


14 Pins
supply voltage of 15V

THS3125CPWP Applications


There are a lot of Texas Instruments THS3125CPWP Instrumentational OP Amps applications.

  • Automotive sensors
  • Automatic control
  • Power generator
  • Multiplication circuits
  • Hand-held batteries
  • Information processing
  • Video computer boards
  • PDA
  • Test and measurement instruments
  • Radar

Write a review

Note: HTML is not translated!
    Bad           Good