THS3125ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.88W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS3125 |
| Pin Count | 14 |
| Number of Elements | 2 |
| Operating Supply Current | 8.4mA |
| Nominal Supply Current | 21mA |
| Power Dissipation | 1.88W |
| Slew Rate | 1550V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 440mA |
| Input Offset Voltage (Vos) | 4.4mV |
| Bandwidth | 160MHz |
| Gain Bandwidth Product | 138MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 138000 kHz |
| Power Supply Rejection Ratio (PSRR) | 53dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Settling Time | 64 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 126MHz |
| Max Frequency | 1MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 10mV |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3125ID Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Current Feedback-type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 14. A total of 14 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 4.4mV voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . A supply current of 8.4mA can be used to operate this linear amplifier. This linear amplifier has a total of 2 elements.
THS3125ID Features
14 Pins
supply voltage of 15V
THS3125ID Applications
There are a lot of Texas Instruments THS3125ID Instrumentational OP Amps applications.
- Biopotential
- Proportional counter tubes
- Band-stop filter
- Logarithmic operation circuits
- Fast A/D and D/A converters
- Non-polarized electrodes
- Multimedia playback equipment
- Video computer boards
- High gain DC amplifier
- Power transmission
