THS3125IPWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS3125 |
| Pin Count | 14 |
| Number of Elements | 2 |
| Operating Supply Current | 8.4mA |
| Nominal Supply Current | 21mA |
| Power Dissipation | 3.3W |
| Slew Rate | 1550V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 440mA |
| Input Offset Voltage (Vos) | 4.4mV |
| Bandwidth | 160MHz |
| Gain Bandwidth Product | 138MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 138000 kHz |
| Power Supply Rejection Ratio (PSRR) | 53dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Settling Time | 64 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 126MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 10mV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3125IPWPR Overview
There is a 14-PowerTSSOP (0.173, 4.40mm Width) case in which the instrumentation amplifier is packaged. This is a Current Feedback type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. A total of 14 terminations have been reported in the past few weeks. A total of 14 pins are located on this board. Please take in mind that op amp should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 14 pins. In terms of input offset voltage, operational amplifier rates 4.4mV. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureThis op amp can operate from a supply current at 8.4mA. The total number of elements in this buffer amplifier is 2. The instrumentation amplifier is packed in the form of TR.
THS3125IPWPR Features
14 Pins
supply voltage of 15V
THS3125IPWPR Applications
There are a lot of Texas Instruments THS3125IPWPR Instrumentational OP Amps applications.
- Vehicle electronics
- Medical instruments
- Signal filtering
- Polarized electrodes
- Power generator
- Test and measurement instruments
- pH (acidity)
- Signal transformation
- High/low-pass filter circuit
- ECG equipment
