THS3201MDGNREP
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS3201 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3.3V |
| Number of Channels | 1 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 18mA |
| Slew Rate | 9800V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 14μA |
| Voltage - Supply, Single/Dual (±) | 6.6V~15V ±3.3V~7.5V |
| Output Current per Channel | 115mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 1.8 GHz |
| Gain Bandwidth Product | 1.8 GHz |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Voltage - Input Offset | 700μV |
| Settling Time | 20 ns |
| Dual Supply Voltage | 5V |
| Consumer IC Type | VIDEO AMPLIFIER |
| Max I/O Voltage | 6mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3201MDGNREP Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case package that contains the instrumentation amplifiers. Op amps are Current Feedback types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. 8 pins are located on the operational amplifiers. Op amp rates 3mV as input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -55°C~125°C , which is a good operating temperature. A supply current of 14mA can be used to operate this linear amplifier. 1 channels are available on the instrumentation amplifier. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. Using VIDEO AMPLIFIER, you can sort the electronic part based on the type of consumer IC that is included.
THS3201MDGNREP Features
8 Pins
THS3201MDGNREP Applications
There are a lot of Texas Instruments THS3201MDGNREP Instrumentational OP Amps applications.
- Test and measurement instruments
- Ultrasound transducers
- Scintillation detectors
- Displayers for aircraft and air transportation control systems
- Large motor controllers
- High gain DC amplifier
- Computer workstations
- Video computer boards
- Biopotential
- Voltage regulation circuit
