Parameters |
Max I/O Voltage |
8mV |
Input Offset Current-Max (IIO) |
0.2μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Max Power Dissipation |
740mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Base Part Number |
THS4001 |
Pin Count |
8 |
Number of Channels |
1 |
Operating Supply Current |
7.8mA |
Nominal Supply Current |
9.5mA |
Power Dissipation |
740mW |
Output Current |
100mA |
Slew Rate |
400V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
85 dB |
Current - Input Bias |
2.6μA |
Voltage - Supply, Single/Dual (±) |
5V~32V ±2.5V~16V |
Output Current per Channel |
100mA |
Input Offset Voltage (Vos) |
8mV |
Bandwidth |
270MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
270000 kHz |
Voltage Gain |
75.56dB |
Average Bias Current-Max (IIB) |
6μA |
Power Supply Rejection Ratio (PSRR) |
75dB |
Low-Offset |
NO |
Frequency Compensation |
yES |
Voltage - Input Offset |
2mV |
Settling Time |
40 ns |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
180MHz |
Bias Current-Max (IIB) @25C |
5μA |
Programmable Power |
NO |
Dual Supply Voltage |
9V |
THS4001CD Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp of this type is a Voltage Feedback-type. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 8mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 7.8mA . There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it.
THS4001CD Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
THS4001CD Applications
There are a lot of Texas Instruments THS4001CD Instrumentational OP Amps applications.
- Digital cameras
- Voltage regulation circuit
- Information processing
- Television
- Subtraction operation circuits
- Band-stop filter
- High/low-pass filter circuit
- Gaming industry
- Active probe
- Weak signal detection