Parameters |
-3db Bandwidth |
180MHz |
Bias Current-Max (IIB) @25C |
5μA |
Programmable Power |
NO |
Dual Supply Voltage |
9V |
Max I/O Voltage |
8mV |
Input Offset Current-Max (IIO) |
0.2μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Max Power Dissipation |
740mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Base Part Number |
THS4001 |
Pin Count |
8 |
Number of Channels |
1 |
Operating Supply Current |
7.8mA |
Nominal Supply Current |
9.5mA |
Power Dissipation |
740mW |
Output Current |
100mA |
Slew Rate |
400V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
85 dB |
Current - Input Bias |
2.6μA |
Voltage - Supply, Single/Dual (±) |
5V~32V ±2.5V~16V |
Output Current per Channel |
100mA |
Input Offset Voltage (Vos) |
8mV |
Bandwidth |
270MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
270000 kHz |
Voltage Gain |
75.56dB |
Average Bias Current-Max (IIB) |
6μA |
Power Supply Rejection Ratio (PSRR) |
75dB |
Low-Offset |
NO |
Frequency Compensation |
yES |
Voltage - Input Offset |
2mV |
Settling Time |
40 ns |
Low-Bias |
NO |
Micropower |
NO |
THS4001ID Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are Voltage Feedback types of amplifier on the chip. Linear amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 8mV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 7.8mA. It is recommended to keep the voltage gain at 75.56dB at all times. There are 1 channels on the operational amplifiers.
THS4001ID Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
THS4001ID Applications
There are a lot of Texas Instruments THS4001ID Instrumentational OP Amps applications.
- Industrial applications including automation
- Division circuits
- E-book readers
- Power transmission
- Digital cameras
- Medical instruments
- Active probe
- Band-stop filter
- Power generator
- Portable electronic products powered by batteries