THS4011CDGNRG4
| Parameters | |
|---|---|
| Slew Rate | 310V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 110mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 290MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 290000 kHz |
| Voltage Gain | 81.58dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Settling Time | 37 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Max I/O Voltage | 6mV |
| Input Offset Current-Max (IIO) | 0.25μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 2.14W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4011 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 7.8mA |
| Nominal Supply Current | 9.5mA |
| Power Dissipation | 2.14W |
THS4011CDGNRG4 Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. This is a Voltage Feedback type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. In total, there are 8 pins on this op amp ic. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 6mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 7.8mA . 81.58dB should be the voltage gain. There is a rating of 1 for the operating supply voltage of the buffer op amp. The instrumentation amplifier is packed in the form of TR.
THS4011CDGNRG4 Features
8 Pins
supply voltage of 15V
81.58dB voltage gain
THS4011CDGNRG4 Applications
There are a lot of Texas Instruments THS4011CDGNRG4 Instrumentational OP Amps applications.
- Weak signal detection
- High speed sample
- Strain gauges
- Instrumentation
- Portable electronic products powered by batteries
- High-frequency data acquisition systems
- Integrator circuits
- Cinema or auditorium audio system
- Division circuits
- Precision measurement
