THS4011ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 740mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | THS4011 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 7.8mA |
| Nominal Supply Current | 9.5mA |
| Power Dissipation | 740mW |
| Output Current | 110mA |
| Slew Rate | 310V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 110mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 270MHz |
| Gain Bandwidth Product | 290MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 290000 kHz |
| Voltage Gain | 81.58dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Settling Time | 37 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Max I/O Voltage | 6mV |
| Input Offset Current-Max (IIO) | 0.25μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4011ID Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Buffer amps of this type are called Voltage Feedback-types. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 6mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. An 7.8mA volt supply current is needed for this linear amplifier to operate. It is a member of the 81.58dB's 81.58dB family. 1 channels are available on the instrumentation amplifier.
THS4011ID Features
8 Pins
supply voltage of 15V
81.58dB voltage gain
THS4011ID Applications
There are a lot of Texas Instruments THS4011ID Instrumentational OP Amps applications.
- Communication
- Video computer boards
- High/low-pass filter circuit
- Laptop
- Image computer boards
- Communication device
- MP3
- Portable media players
- Subtraction operation circuits
- Exponential operation circuits
