THS4022CDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 2.14W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4022 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 7.8mA |
| Nominal Supply Current | 20mA |
| Power Dissipation | 2.14W |
| Slew Rate | 470V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 350MHz |
| Gain Bandwidth Product | 3.5 GHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3500000 kHz |
| Voltage Gain | 90.88dB |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Voltage - Input Offset | 500μV |
| Settling Time | 40 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 70MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 2mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4022CDGNR Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad-case to contain the op amp ic. Buffer amps of this type are called Voltage Feedback-types. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. The number of terminations is approaching the 8 mark. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. Op amp ic rates 2mV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . You can run this op amp ic on 7.8mA . Op amp is a member of the 90.88dB's 90.88dB family. It is possible to count 2 elements on this buffer amplifier. An buffer amplifier is packed in a TR-shape according to the design.
THS4022CDGNR Features
8 Pins
supply voltage of 15V
90.88dB voltage gain
THS4022CDGNR Applications
There are a lot of Texas Instruments THS4022CDGNR Instrumentational OP Amps applications.
- Signal operation
- Commercial audio systems
- Oscilloscopes
- Integrator circuits
- Signal filtering
- Laptop
- PDA
- Car stereo
- High speed sample
- Blood pressure sensors
