banner_page

THS4022IDGN

100mA per Channel 3μA 74 dB Instrumentational OP Amps 6μA 9V~32V ±4.5V~16V THS4022 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-THS4022IDGN
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: -
  • Stock: 513
  • Description: 100mA per Channel 3μA 74 dB Instrumentational OP Amps 6μA 9V~32V ±4.5V~16V THS4022 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount YES
Number of Pins 8
Weight 18.99418mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Max Power Dissipation 2.14W
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Terminal Pitch 0.65mm
Base Part Number THS4022
Pin Count 8
Number of Elements 2
Operating Supply Current 7.8mA
Nominal Supply Current 20mA
Power Dissipation 2.14W
Slew Rate 470V/μs
Amplifier Type Voltage Feedback
Common Mode Rejection Ratio 74 dB
Current - Input Bias 3μA
Voltage - Supply, Single/Dual (±) 9V~32V ±4.5V~16V
Output Current per Channel 100mA
Input Offset Voltage (Vos) 2mV
Bandwidth 350MHz
Gain Bandwidth Product 3.5 GHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 3500000 kHz
Voltage Gain 90.88dB
Average Bias Current-Max (IIB) 6μA
Power Supply Rejection Ratio (PSRR) 80dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 16.5V
Voltage - Input Offset 500μV
Settling Time 40 ns
Low-Bias NO
Micropower NO
-3db Bandwidth 70MHz
Bias Current-Max (IIB) @25C 6μA
Programmable Power NO
Neg Supply Voltage-Max (Vsup) -16.5V
Max I/O Voltage 2mV
Height 1.1mm
Length 3mm
Width 3mm
Thickness 1.02mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

THS4022IDGN Overview


Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. Op amps are Voltage Feedback types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. Op amp rates 2mV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 7.8mA . There should be no change in the voltage gain at 90.88dB. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer.

THS4022IDGN Features


8 Pins
supply voltage of 15V
90.88dB voltage gain

THS4022IDGN Applications


There are a lot of Texas Instruments THS4022IDGN Instrumentational OP Amps applications.

  • Fast A/D and D/A converters
  • Vehicle electronics
  • Biopotential
  • Ultrasound transducers
  • Proportional operation circuits
  • earphone
  • ECG equipment
  • Mobile phone
  • Division circuits
  • Switching amplifier

Write a review

Note: HTML is not translated!
    Bad           Good