THS4031ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 629mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | THS4031 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 8.5mA |
| Nominal Supply Current | 8.5mA |
| Power Dissipation | 629mW |
| Slew Rate | 100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 120MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 200000 kHz |
| Voltage Gain | 95dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 60 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 90MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.25μA |
| Input Voltage Noise Density | 1.6nV/sqrt Hz |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4031ID Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Voltage Feedback-type instrumentation amplifiers are used in this application. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 8.5mA . You should keep the voltage gain at 95dB for the time being. The op amp ic has 1 channels on it.
THS4031ID Features
8 Pins
supply voltage of 15V
95dB voltage gain
THS4031ID Applications
There are a lot of Texas Instruments THS4031ID Instrumentational OP Amps applications.
- Weighing systems
- Industrial applications including automation
- Voltage regulation circuit
- High speed sample
- Automatic control
- RF cable systems
- Power generator
- Radiation thermometry transducers
- Video computer boards
- Micro signal measurement
