THS4031IDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.8W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4031 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 8.5mA |
| Nominal Supply Current | 10mA |
| Power Dissipation | 1.8W |
| Output Current | 90mA |
| Max Supply Current | 9mA |
| Slew Rate | 100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 120MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 200000 kHz |
| Voltage Gain | 95dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 60 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 90MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.25μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4031IDGN Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case in which the instrumentation amplifier is packaged. An op amp of this type is a Voltage Feedback-type. A Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using an 8.5mA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 95dB. The op amp ic has 1 channels on it.
THS4031IDGN Features
8 Pins
supply voltage of 15V
95dB voltage gain
THS4031IDGN Applications
There are a lot of Texas Instruments THS4031IDGN Instrumentational OP Amps applications.
- E-book readers
- Computer workstations
- Industrial applications including automation
- Test equipment
- Medical imaging
- Scintillation detectors
- Inverse/same-phase proportional circuit
- Car stereo
- Power control
- Active probe
