banner_page

THS4031IDGNG4

90mA per Channel 3μA 90 dB Instrumentational OP Amps 9V~32V ±4.5V~16V THS4031 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-THS4031IDGNG4
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: -
  • Stock: 731
  • Description: 90mA per Channel 3μA 90 dB Instrumentational OP Amps 9V~32V ±4.5V~16V THS4031 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Details

Tags

Parameters
Amplifier Type Voltage Feedback
Common Mode Rejection Ratio 90 dB
Current - Input Bias 3μA
Voltage - Supply, Single/Dual (±) 9V~32V ±4.5V~16V
Output Current per Channel 90mA
Input Offset Voltage (Vos) 2mV
Bandwidth 100MHz
Gain Bandwidth Product 120MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 200000 kHz
Voltage Gain 95dB
Power Supply Rejection Ratio (PSRR) 85dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 500μV
Settling Time 60 ns
Low-Bias NO
Micropower NO
-3db Bandwidth 90MHz
Bias Current-Max (IIB) @25C 6μA
Programmable Power NO
Max I/O Voltage 2mV
Input Offset Current-Max (IIO) 0.25μA
Height 1.1mm
Length 3mm
Width 3mm
Thickness 1.02mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount YES
Number of Pins 8
Weight 24.408939mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Max Power Dissipation 1.8W
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Terminal Pitch 0.65mm
Base Part Number THS4031
Pin Count 8
Number of Elements 1
Operating Supply Current 8.5mA
Nominal Supply Current 10mA
Power Dissipation 1.8W
Slew Rate 100V/μs

THS4031IDGNG4 Overview


There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case package that contains the instrumentation amplifiers. Op amps are Voltage Feedback types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 8 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . As long as the supply current of the chip does not exceed 8.5mA, this op amp ic can operate. You should keep the voltage gain at 95dB for the time being. Op amp has total of 1 elements.

THS4031IDGNG4 Features


8 Pins
supply voltage of 15V
95dB voltage gain

THS4031IDGNG4 Applications


There are a lot of Texas Instruments THS4031IDGNG4 Instrumentational OP Amps applications.

  • Communication
  • Subtraction operation circuits
  • Automatic control
  • Industrial control system
  • Strain gauges
  • Fission chambers
  • Signal amplification
  • High-frequency data acquisition systems
  • Video conversion and routing
  • Radiation thermometry transducers

Write a review

Note: HTML is not translated!
    Bad           Good