THS4032IDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 1.8W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4032 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 8.5mA |
| Nominal Supply Current | 20mA |
| Power Dissipation | 1.8W |
| Slew Rate | 100V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 120MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 200000 kHz |
| Voltage Gain | 95dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Voltage - Input Offset | 500μV |
| Settling Time | 60 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 90MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 2mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4032IDGNR Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. Buffer amps of this type are called Voltage Feedback-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 8 pins. Op amp ic rates 2mV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Operational amplifier can operate supply current at 8.5mA. 95dB should be the voltage gain. A total of 2 elements are present in this linear amplifier. For packing the buffer amplifier, the TR-axis is adopted.
THS4032IDGNR Features
8 Pins
supply voltage of 15V
95dB voltage gain
THS4032IDGNR Applications
There are a lot of Texas Instruments THS4032IDGNR Instrumentational OP Amps applications.
- Digital cameras
- Automation control systems
- Industrial control system
- Weak signal detection
- Oscilloscopes
- Signal operation
- Scintillation detectors
- Weighing systems
- Video data acquisition
- Hand-held batteries
