THS4041IDRG4Q1
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 165000 kHz |
| Gain Bandwidth Product | 165MHz |
| Voltage Gain | 76dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Voltage - Input Offset | 2.5mV |
| Settling Time | 120 ns |
| Consumer IC Type | VIDEO AMPLIFIER |
| Max I/O Voltage | 2mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | IT CAN ALSO OPERATE WITH 9V TO 32V SINGLE SUPPLY |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | THS4041 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 8.5mA |
| Slew Rate | 400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2.5μA |
THS4041IDRG4Q1 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. A Voltage Feedback-type buffer amplifier is shown here. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In this case, there are 8 pins on the board. The buffer op amp includes 8 pins. Op amp rates 10mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. A supply current of 8mA can be used to operate this linear amplifier. 76dB should be the voltage gain. 1 channels are available on the instrumentation amplifier. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. The operating supply voltage of instrumentation amplifier is rated 18V voltage. As the name implies, Automotive, AEC-Q100 refers to the series of the buffer op amp. In this case, VIDEO AMPLIFIER can be used to sort the op amps by the type of consumer IC in the part. Refer to this op amp ic's additional benefit: IT CAN ALSO OPERATE WITH 9V TO 32V SINGLE SUPPLY.
THS4041IDRG4Q1 Features
8 Pins
76dB voltage gain
THS4041IDRG4Q1 Applications
There are a lot of Texas Instruments THS4041IDRG4Q1 Instrumentational OP Amps applications.
- Mobile phone
- High/low-pass filter circuit
- Power generator
- Proportional operation circuits
- Division circuits
- Television broadcasting equipment
- Scintillation detectors
- Video conversion and routing
- single/dual op amp sum and difference circuits
- High gain DC amplifier
