THS4041IDRQ1

1 Channels 100mA per Channel 2.5μA 80 dB Instrumentational OP Amps 9V~32V ±4.5V~16V THS4041 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-THS4041IDRQ1
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 595
Description: 1 Channels 100mA per Channel 2.5μA 80 dB Instrumentational OP Amps 9V~32V ±4.5V~16V THS4041 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	75.891673mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	IT CAN ALSO OPERATE WITH 9V TO 32V SINGLE SUPPLY
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Base Part Number	THS4041
Pin Count	8
Number of Elements	1
Supply Voltage-Min (Vsup)	4.5V
Number of Channels	1
Operating Supply Current	8mA
Nominal Supply Current	9.5mA
Slew Rate	400V/μs
Amplifier Type	Voltage Feedback
Common Mode Rejection Ratio	80 dB
Current - Input Bias	2.5μA
Voltage - Supply, Single/Dual (±)	9V~32V ±4.5V~16V
Output Current per Channel	100mA
Input Offset Voltage (Vos)	10mV
Bandwidth	165MHz
Gain Bandwidth Product	165MHz
Voltage Gain	76dB
Power Supply Rejection Ratio (PSRR)	75dB
Voltage - Input Offset	2.5mV
Settling Time	120 ns
Consumer IC Type	VIDEO AMPLIFIER
Max I/O Voltage	2mV
Height	1.75mm

THS4041IDRQ1 Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the Voltage Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. In total, there are 8 pins on this op amp ic. Linear amplifier includes 8 pins. Op amp ic rates 10mV for input offset voltage. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. You can run this op amp ic on 8mA . Keeping the voltage gain at 76dB is the best course of action. Instrumentation amplifier has 1 channels on it. There is a rating of 1 for the operating supply voltage of the buffer op amp. In this case, Automotive, AEC-Q100 represents the instrumentation amplifiers' series number. The VIDEO AMPLIFIER value can be used to sort the electronic part by its consumer IC type. Please refer to the followong extra aspects of op amp: IT CAN ALSO OPERATE WITH 9V TO 32V SINGLE SUPPLY.