THS4042ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 740mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS4042 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 19mA |
| Power Dissipation | 740mW |
| Slew Rate | 400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 165MHz |
| Gain Bandwidth Product | 165MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 165000 kHz |
| Voltage Gain | 76dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Voltage - Input Offset | 2.5mV |
| Settling Time | 95 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 60MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Max I/O Voltage | 10mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4042ID Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. This is a Voltage Feedback type op amp. Linear amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 10mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. Using a supply current of 8mA , this buffer op amp will be able to operate. Keeping the voltage gain at 76dB is the best course of action. The op amp is rated for an operating supply voltage of 2.
THS4042ID Features
8 Pins
supply voltage of 15V
76dB voltage gain
THS4042ID Applications
There are a lot of Texas Instruments THS4042ID Instrumentational OP Amps applications.
- Instrumentation
- Inverse/same-phase proportional circuit
- Hand-held batteries
- High gain DC amplifier
- Image computer boards
- Gaming industry
- Integrator circuits
- Comparator
- Commercial audio systems
- Radiation thermometry transducers
