THS4051CDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 2.14W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4051 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 8.5mA |
| Nominal Supply Current | 10.5mA |
| Power Dissipation | 2.14W |
| Slew Rate | 240V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 70MHz |
| Gain Bandwidth Product | 70MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 70000 kHz |
| Voltage Gain | 75.56dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2.5mV |
| Settling Time | 60 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 38MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Max I/O Voltage | 10mV |
| Input Offset Current-Max (IIO) | 0.25μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4051CDGNR Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad-case to contain the op amp ic. Buffer amps of this type are called Voltage Feedback-types. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 10mV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . As long as the supply current of the chip does not exceed 8.5mA, this op amp ic can operate. 75.56dB should remain the voltage gain. A total of 1 elements are present in this linear amplifier. A TR-shaped amplifier is used to pack the buffer amps.
THS4051CDGNR Features
8 Pins
supply voltage of 15V
75.56dB voltage gain
THS4051CDGNR Applications
There are a lot of Texas Instruments THS4051CDGNR Instrumentational OP Amps applications.
- Fission chambers
- Proportional operation circuits
- Displayers for aircraft and air transportation control systems
- Instrumentation
- Power control
- RF cable systems
- Video computer boards
- Large motor controllers
- Band-pass filter
- High/low-pass filter circuit
