THS4061MFKB
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Package / Case | LCC |
| Surface Mount | YES |
| Number of Pins | 20 |
| Packaging | Rail/Tube |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Pin Count | 20 |
| Temperature Grade | MILITARY |
| Number of Channels | 1 |
| Max Supply Voltage | 32V |
| Min Supply Voltage | 9V |
| Power Dissipation | 1.375W |
| Supply Current-Max | 9mA |
| Slew Rate | 400 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 6μA |
| Input Offset Voltage (Vos) | 8mV |
| Gain Bandwidth Product | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 180000 kHz |
| Voltage Gain | 75.56dB |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 40 ns |
| Max Dual Supply Voltage | 16.5V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 180MHz |
| Min Dual Supply Voltage | 4.5V |
| Programmable Power | NO |
| Max I/O Voltage | 8mV |
| Wideband | YES |
| Input Offset Current-Max (IIO) | 0.25μA |
| Height | 2.03mm |
| Length | 8.89mm |
| Width | 8.89mm |
| Thickness | 1.83mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
THS4061MFKB Overview
In the package, you will find a LCC-case to contain the op amp ic. An op amp of this type is a OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Rail/Tube case. There have been a total of 20 terminations over the past year. It consists of a total of 20 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Instrumentation amplifier is a part of Operational Amplifier. It has 20 pins that make up the linear amplifier. The input offset voltage is 8mV. There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it. It is recommended that the temperature of this op amp ic should not fall below -55°C degrees Fahrenheit at any time. A temperature greater than 125°C should not be used for the operation of this instrumentation amplifier. Under 32V is the minimum supply voltage for this electric component. As a rule of thumb, the supply voltage of the op amp should not be lower than 9V. In order to conduct this part, you will need to provide dual supply voltages of 16.5V volts.
THS4061MFKB Features
20 Pins
supply voltage of 15V
75.56dB voltage gain
THS4061MFKB Applications
There are a lot of Texas Instruments THS4061MFKB Instrumentational OP Amps applications.
- Band-stop filter
- Test equipment
- Division circuits
- Proportional counter tubes
- Integrator circuits
- Proportional operation circuits
- Thermocouples
- Micro signal measurement
- Gaming industry
- Television
