THS4081CDR
| Parameters | |
|---|---|
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 3.4mA |
| Nominal Supply Current | 4.2mA |
| Power Dissipation | 740mW |
| Slew Rate | 230V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 1.2μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 175MHz |
| Gain Bandwidth Product | 100MHz |
| Voltage Gain | 84.08dB |
| Power Supply Rejection Ratio (PSRR) | 79dB |
| Voltage - Input Offset | 1mV |
| Settling Time | 43 ns |
| Consumer IC Type | VIDEO AMPLIFIER |
| Max I/O Voltage | 7mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 740mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | THS4081 |
| Pin Count | 8 |
THS4081CDR Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the Voltage Feedback type. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. The total number of pins on linear amplifier is 8. 8 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 7mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureA supply current of 3.4mA can be used to operate this linear amplifier. 84.08dB should be the voltage gain. Op amp ic has 1 channels. There are 1 elements in this buffer amplifier. Sorting based on consumer IC type can be done by using VIDEO AMPLIFIER.
THS4081CDR Features
8 Pins
84.08dB voltage gain
THS4081CDR Applications
There are a lot of Texas Instruments THS4081CDR Instrumentational OP Amps applications.
- Video data acquisition
- Industrial control system
- Active probe
- Subtraction operation circuits
- Signal transformation
- Computer workstations
- Fast A/D and D/A converters
- Integrator circuits
- Weighing systems
- Comparator
