THS4082CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | IT CAN ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY |
| Max Power Dissipation | 740mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | THS4082 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 15V |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 3.4mA |
| Nominal Supply Current | 8.4mA |
| Power Dissipation | 740mW |
| Slew Rate | 230V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 1.2μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 175MHz |
| Gain Bandwidth Product | 100MHz |
| Voltage Gain | 84.08dB |
| Power Supply Rejection Ratio (PSRR) | 79dB |
| Voltage - Input Offset | 1mV |
| Settling Time | 43 ns |
| Consumer IC Type | VIDEO AMPLIFIER |
| Max I/O Voltage | 4.5mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4082CDR Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are Voltage Feedback types of amplifier on the chip. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 7mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . As long as the supply current of the chip does not exceed 3.4mA, this op amp ic can operate. Voltage gain should remain at 84.08dB. There are 1 channels on the operational amplifiers. A total of 2 elements are present in this linear amplifier. VIDEO AMPLIFIER sorts consumer ICs by type. This buffer op amp has an additional benefit, which you can refer to as follows: IT CAN ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY.
THS4082CDR Features
8 Pins
84.08dB voltage gain
THS4082CDR Applications
There are a lot of Texas Instruments THS4082CDR Instrumentational OP Amps applications.
- Test equipment
- Medical instruments
- Mobile phone
- Hand-held batteries
- Cinema or auditorium audio system
- Car stereo
- Signal filtering
- PDA
- Broadcasting
- single/dual op amp sum and difference circuits
