THS4121CDGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 23.303308mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 820MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 385mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4121 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 13.5mA |
| Power Dissipation | 385mW |
| Slew Rate | 55V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 64 dB |
| Current - Input Bias | 1.2pA |
| Max Input Voltage | -100mV |
| Voltage - Supply, Single/Dual (±) | 3V~3.5V ±1.5V~1.75V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 8mV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 100MHz |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 66dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 3.6V |
| Voltage - Input Offset | 3mV |
| Settling Time | 60 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 100MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 1.65V |
| Max I/O Voltage | 8mV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4121CDGK Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp ic of the Differential type. Upon delivery, op amp ic is packaged in a Tube case. There have been a total of 8 terminations over the past year. The pins on this board total to 8 in total. This linear amplifier should be powered by an 3.3V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 8mV. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureOperational amplifier can operate supply current at 11mA. The voltage gain should stay at 66dB. This linear amplifier has a total of 1 elements. 820MOhm is the range in which the op amp resistance should lie.
THS4121CDGK Features
8 Pins
supply voltage of 3.3V
66dB voltage gain
Resistance of 820MOhm
THS4121CDGK Applications
There are a lot of Texas Instruments THS4121CDGK Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Instrumentation
- Addition operation circuits
- Home audio systems
- Semiconductor detectors
- Active probe
- Cinema or auditorium audio system
- Video amplifiers
- Measurements of Wheatstone bridge
- Automotive sensors
