THS4121IDGNG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 820MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.71W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4121 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 13.5mA |
| Power Dissipation | 1.71W |
| Slew Rate | 55V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 64 dB |
| Current - Input Bias | 1.2pA |
| Max Input Voltage | -100mV |
| Voltage - Supply, Single/Dual (±) | 3V~3.5V ±1.5V~1.75V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 8mV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 100MHz |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 66dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 3.6V |
| Voltage - Input Offset | 3mV |
| Settling Time | 60 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 100MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 1.65V |
| Max I/O Voltage | 8mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4121IDGNG4 Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used to package the op amp. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tube case. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 3.3V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 8mV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. A supply current of 11mA can be used to operate this linear amplifier. Keeping the voltage gain at 66dB is the best course of action. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. The operating supply voltage of the buffer op amp is rated at 3.3V. 820MOhm should be the range of resistance for the linear amplifier.
THS4121IDGNG4 Features
8 Pins
supply voltage of 3.3V
66dB voltage gain
Resistance of 820MOhm
THS4121IDGNG4 Applications
There are a lot of Texas Instruments THS4121IDGNG4 Instrumentational OP Amps applications.
- Communication
- Computer workstations
- Large motor controllers
- Video data acquisition
- Exponential operation circuits
- Band-stop filter
- Medical imaging
- Scintillation detectors
- Digital cameras
- Image computer boards
