THS4130IDGK

1 Channels 85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 5V 4V~33V ±2V~16.5V THS4130 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-THS4130IDGK
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 689
Description: 1 Channels 85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 5V 4V~33V ±2V~16.5V THS4130 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Weight	23.303308mg
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	34MOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Max Power Dissipation	385mW
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	THS4130
Pin Count	8
Operating Supply Voltage	5V
Number of Channels	1
Operating Supply Current	12.3mA
Nominal Supply Current	14mA
Power Dissipation	385mW
Min Input Voltage	1.23V
Slew Rate	52V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Differential
Common Mode Rejection Ratio	80 dB
Current - Input Bias	2μA
Max Input Voltage	-700mV
Voltage - Supply, Single/Dual (±)	4V~33V ±2V~16.5V
Output Current per Channel	85mA
Input Offset Voltage (Vos)	2mV
Bandwidth	150MHz
Gain Bandwidth Product	225MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	170000 kHz
Voltage Gain	78dB
Average Bias Current-Max (IIB)	6μA
Power Supply Rejection Ratio (PSRR)	73dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	200μV
Settling Time	78 ns
Low-Bias	NO
Micropower	NO
-3db Bandwidth	80MHz
Bias Current-Max (IIB) @25C	6μA
Programmable Power	NO
Dual Supply Voltage	15V
Max I/O Voltage	2mV
Input Offset Current-Max (IIO)	0.5μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

THS4130IDGK Overview

It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called Differential-types. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 8 pins on this chip. Op amp rates 2mV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . An 12.3mA volt supply current is needed for this linear amplifier to operate. 78dB should remain the voltage gain. Op amp ic has 1 channels. The operating supply voltage of instrumentation amplifier is rated 5V voltage. During testing, the instrumentation amplifier resistance should remain within a range of 34MOhm.