THS4130IDGNRG4
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 34MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 1.71W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4130 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Operating Supply Current | 12.3mA |
| Nominal Supply Current | 15mA |
| Power Dissipation | 1.71W |
| Min Input Voltage | 1.23V |
| Slew Rate | 52V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2μA |
| Max Input Voltage | -700mV |
| Voltage - Supply, Single/Dual (±) | 4V~33V ±2V~16.5V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 150MHz |
| Gain Bandwidth Product | 225MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 170000 kHz |
| Voltage Gain | 78dB |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Settling Time | 78 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 80MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.5μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
THS4130IDGNRG4 Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case which makes it easy for the consumer to handle. A Differential-type buffer amplifier is shown here. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 8 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . You can run this op amp ic on 12.3mA . 78dB should be the voltage gain. A voltage rating of 1 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 15V voltage. TR is adopted to pack the instrumentation amplifier. During testing, the buffer amplifier resistance should remain within a range of 34MOhm.
THS4130IDGNRG4 Features
8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm
THS4130IDGNRG4 Applications
There are a lot of Texas Instruments THS4130IDGNRG4 Instrumentational OP Amps applications.
- Semiconductor detectors
- Communication device
- Switching amplifier
- Cinema or auditorium audio system
- Weak signal detection
- Inverse/same-phase proportional circuit
- Subtraction operation circuits
- High input resistance broadband
- MP3
- Integrator circuits
