THS4130IDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 34MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 1.02W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4130 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Operating Supply Current | 12.3mA |
| Nominal Supply Current | 15mA |
| Power Dissipation | 1.02W |
| Min Input Voltage | 1.23V |
| Slew Rate | 52V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2μA |
| Max Input Voltage | -700mV |
| Voltage - Supply, Single/Dual (±) | 4V~33V ±2V~16.5V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 150MHz |
| Gain Bandwidth Product | 225MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 170000 kHz |
| Voltage Gain | 78dB |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Settling Time | 78 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 80MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.5μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4130IDRG4 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the Differential-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . This op amp can operate from a supply current at 12.3mA. Maintain 78dB as the voltage gain. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 15V. This linear amplifier pack is based on the TR axis. It is important that the op amp resistance stays within the range of 34MOhm.
THS4130IDRG4 Features
8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm
THS4130IDRG4 Applications
There are a lot of Texas Instruments THS4130IDRG4 Instrumentational OP Amps applications.
- Tablets
- Differentiator circuits
- Subtraction operation circuits
- Cinema or auditorium audio system
- Signal transformation
- Hand-held batteries
- Wireless base stations
- Gaming industry
- Multiplication circuits
- Home audio systems
