Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
24.408939mg |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
34MOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Max Power Dissipation |
1.71W |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
THS4131 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Operating Supply Current |
12.3mA |
Nominal Supply Current |
15mA |
Power Dissipation |
1.71W |
Min Input Voltage |
1.23V |
Slew Rate |
52V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Differential |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
2μA |
Max Input Voltage |
-700mV |
Voltage - Supply, Single/Dual (±) |
4V~33V ±2V~16.5V |
Output Current per Channel |
85mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
150MHz |
Gain Bandwidth Product |
225MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
170000 kHz |
Voltage Gain |
78dB |
Average Bias Current-Max (IIB) |
6μA |
Power Supply Rejection Ratio (PSRR) |
73dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
200μV |
Settling Time |
78 ns |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
80MHz |
Bias Current-Max (IIB) @25C |
6μA |
Programmable Power |
NO |
Dual Supply Voltage |
15V |
Max I/O Voltage |
2mV |
Input Offset Current-Max (IIO) |
0.5μA |
Height |
1.1mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
THS4131CDGNG4 Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used. Buffer amps of this type are called Differential-types. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations is approaching the 8 mark. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 8 pins. The input offset voltage is 2mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . You can run this op amp ic on 12.3mA . The voltage gain should stay at 78dB. A voltage rating of 1 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 5V voltage. In order for the op amp resistance to remain within the 34MOhm range, the op amp should be tested.
THS4131CDGNG4 Features
8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm
THS4131CDGNG4 Applications
There are a lot of Texas Instruments THS4131CDGNG4 Instrumentational OP Amps applications.
- Test equipment
- Micro signal measurement
- Communication
- pH (acidity)
- High-frequency data acquisition systems
- Television broadcasting equipment
- Fast A/D and D/A converters
- Computer workstations
- Industrial applications including automation
- E-book readers