THS4131IDGKR

1 Channels 85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 15V 4V~33V ±2V~16.5V THS4131 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-THS4131IDGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 388
Description: 1 Channels 85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 15V 4V~33V ±2V~16.5V THS4131 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Weight	23.303308mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	34MOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Max Power Dissipation	385mW
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	THS4131
Pin Count	8
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	1
Operating Supply Current	12.3mA
Nominal Supply Current	15mA
Power Dissipation	385mW
Min Input Voltage	1.23V
Slew Rate	52V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Differential
Common Mode Rejection Ratio	80 dB
Current - Input Bias	2μA
Max Input Voltage	-700mV
Voltage - Supply, Single/Dual (±)	4V~33V ±2V~16.5V
Output Current per Channel	85mA
Input Offset Voltage (Vos)	2mV
Bandwidth	150MHz
Gain Bandwidth Product	225MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	170000 kHz
Voltage Gain	78dB
Average Bias Current-Max (IIB)	6μA
Power Supply Rejection Ratio (PSRR)	73dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	200μV
Low-Bias	NO
Micropower	NO
-3db Bandwidth	80MHz
Bias Current-Max (IIB) @25C	6μA
Programmable Power	NO
Dual Supply Voltage	15V
Input Offset Current-Max (IIO)	0.5μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

THS4131IDGKR Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. This is a Differential type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are included on the operational amplifiers. The input offset voltage is 2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. You can run this op amp ic on 12.3mA . There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 15V voltage. To pack the operational amplifier ics, TR is adopted as the packing method. 34MOhm should be the range of resistance for the instrumentation amplifier.