banner_page

THS4131IDGN

1 Channels 85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 5V 4V~33V ±2V~16.5V THS4131 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-THS4131IDGN
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: -
  • Stock: 908
  • Description: 1 Channels 85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 5V 4V~33V ±2V~16.5V THS4131 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount YES
Number of Pins 8
Weight 24.408939mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 34MOhm
Subcategory Operational Amplifier
Max Power Dissipation 1.71W
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number THS4131
Pin Count 8
Operating Supply Voltage 5V
Number of Channels 1
Operating Supply Current 12.3mA
Nominal Supply Current 860μA
Power Dissipation 1.71W
Min Input Voltage 4V
Slew Rate 52V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Differential
Common Mode Rejection Ratio 80 dB
Current - Input Bias 2μA
Max Input Voltage 33V
Voltage - Supply, Single/Dual (±) 4V~33V ±2V~16.5V
Output Current per Channel 85mA
Input Offset Voltage (Vos) 200μV
Bandwidth 150MHz
Gain Bandwidth Product 225MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 170000 kHz
Voltage Gain 78dB
Average Bias Current-Max (IIB) 6μA
Power Supply Rejection Ratio (PSRR) 73dB
Low-Offset NO
Frequency Compensation YES
Settling Time 78 ns
Low-Bias NO
Micropower NO
-3db Bandwidth 80MHz
Bias Current-Max (IIB) @25C 6μA
Programmable Power NO
Dual Supply Voltage 15V
Max I/O Voltage 2mV
Input Offset Current-Max (IIO) 0.5μA
Height 1.1mm
Length 3mm
Width 3mm
Thickness 1.02mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

THS4131IDGN Overview


The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. Differential-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 200μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Operational amplifier can operate supply current at 12.3mA. The voltage gain should stay at 78dB. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of the buffer op amp is rated at 5V. During testing, the buffer amplifier resistance should remain within a range of 34MOhm.

THS4131IDGN Features


8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm

THS4131IDGN Applications


There are a lot of Texas Instruments THS4131IDGN Instrumentational OP Amps applications.

  • Signal amplification
  • E-book readers
  • Weighing systems
  • Computer workstations
  • Inverse/same-phase proportional circuit
  • Oscilloscopes
  • PDA
  • Signal filtering
  • Video computer boards
  • Voltage regulation circuit

Write a review

Note: HTML is not translated!
    Bad           Good