THS4140CDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 14.4MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.71W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4140 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 13.2mA |
| Nominal Supply Current | 16mA |
| Power Dissipation | 1.71W |
| Slew Rate | 450V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 5.1μA |
| Max Input Voltage | -700mV |
| Voltage - Supply, Single/Dual (±) | 4V~33V ±2V~16.5V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 160MHz |
| Gain Bandwidth Product | 205MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 170000 kHz |
| Voltage Gain | 67dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Settling Time | 96 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 160MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Max I/O Voltage | 7mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4140CDGN Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used. This is a Differential type op amp. A Tube case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 7mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 13.2mA and 10 . Op amp is a member of the 67dB's 67dB family. There is a rating of 1 for the operating supply voltage of the buffer op amp. The operating supply voltage of the buffer op amp is rated at 5V. It is important to keep the resistance within the 14.4MOhm range of the op amps.
THS4140CDGN Features
8 Pins
supply voltage of 5V
67dB voltage gain
Resistance of 14.4MOhm
THS4140CDGN Applications
There are a lot of Texas Instruments THS4140CDGN Instrumentational OP Amps applications.
- Non-polarized electrodes
- ECG equipment
- Voltage regulation circuit
- Weighing systems
- Home audio systems
- Radar
- Radiation thermometry transducers
- Scintillation detectors
- Video computer boards
- Video conversion and routing
