THS4141IDGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 23.303308mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 14.4MOhm |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 385mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4141 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Operating Supply Current | 13.2mA |
| Nominal Supply Current | 16mA |
| Power Dissipation | 385mW |
| Slew Rate | 450V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 5.1μA |
| Max Input Voltage | -700mV |
| Voltage - Supply, Single/Dual (±) | 4V~33V ±2V~16.5V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 160MHz |
| Gain Bandwidth Product | 205MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 67dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 1mV |
| Settling Time | 96 ns |
| Dual Supply Voltage | 15V |
| Max I/O Voltage | 7mV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4141IDGK Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Differential-type. A Tube case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are available on the instrumentation amplifier. There is an input offset voltage of 7mV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 13.2mA and 10 . 67dB should be the voltage gain. As a whole, there are 1 elements that make up this buffer amplifier. In order for the buffer amplifier resistance to remain within the 14.4MOhm range, the device should be tested.
THS4141IDGK Features
8 Pins
supply voltage of 5V
67dB voltage gain
Resistance of 14.4MOhm
THS4141IDGK Applications
There are a lot of Texas Instruments THS4141IDGK Instrumentational OP Amps applications.
- Portable media players
- Industrial applications including automation
- Comparator
- Measurements of Wheatstone bridge
- Band-stop filter
- Oscilloscopes
- Image computer boards
- Digital cameras
- Voltage regulation circuit
- Gaming industry
