THS4150CDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 14.4MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 1.07W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4150 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Operating Supply Current | 17.5mA |
| Nominal Supply Current | 21mA |
| Power Dissipation | 1.07W |
| Slew Rate | 650V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 4.3μA |
| Voltage - Supply, Single/Dual (±) | 4V~33V ±2V~16.5V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 150MHz |
| Gain Bandwidth Product | 340MHz |
| Unity Gain BW-Nom | 150000 kHz |
| Voltage Gain | 67dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.1mV |
| Settling Time | 53 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 80MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Max I/O Voltage | 7mV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4150CDGNR Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. An op amp of this type is a Differential-type. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 7mV. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 17.5mA . It is recommended to keep the voltage gain at 67dB at all times. Op amp has total of 1 elements. As a result of this, the buffer amplifier is packed in TR. The op amp resistance should stay within the range of 14.4MOhm.
THS4150CDGNR Features
8 Pins
supply voltage of 5V
67dB voltage gain
Resistance of 14.4MOhm
THS4150CDGNR Applications
There are a lot of Texas Instruments THS4150CDGNR Instrumentational OP Amps applications.
- Polarized electrodes
- Television broadcasting equipment
- E-book readers
- Strain gauges
- Blood pressure sensors
- Portable electronic products powered by batteries
- Precision measurement
- Fission chambers
- Instrumentation
- single/dual op amp sum and difference circuits
