Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
24.408939mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
14.4MOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Max Power Dissipation |
1.07W |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
THS4150 |
Pin Count |
8 |
Operating Supply Voltage |
30V |
Number of Elements |
1 |
Operating Supply Current |
17.5mA |
Nominal Supply Current |
21mA |
Power Dissipation |
1.07W |
Slew Rate |
650V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Differential |
Common Mode Rejection Ratio |
75 dB |
Current - Input Bias |
4.3μA |
Voltage - Supply, Single/Dual (±) |
4V~33V ±2V~16.5V |
Output Current per Channel |
85mA |
Input Offset Voltage (Vos) |
7mV |
Bandwidth |
150MHz |
Gain Bandwidth Product |
340MHz |
Unity Gain BW-Nom |
150000 kHz |
Voltage Gain |
67dB |
Power Supply Rejection Ratio (PSRR) |
70dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
1.1mV |
Settling Time |
53 ns |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
80MHz |
Programmable Power |
NO |
Dual Supply Voltage |
15V |
Max I/O Voltage |
7mV |
Height |
1.1mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
THS4150IDGN Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case in which the instrumentation amplifier is packaged. This is a Differential type op amp. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations is approaching the 8 mark. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 7mV voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . As long as the supply current of the chip does not exceed 17.5mA, this op amp ic can operate. It is recommended to keep the voltage gain at 67dB at all times. The linear amplifier consists of 1 different elements in total. The operating supply voltage of instrumentation amplifier is rated 30V voltage. 14.4MOhm should be the range of resistance for the instrumentation amplifier.
THS4150IDGN Features
8 Pins
supply voltage of 5V
67dB voltage gain
Resistance of 14.4MOhm
THS4150IDGN Applications
There are a lot of Texas Instruments THS4150IDGN Instrumentational OP Amps applications.
- Band-pass filter
- Radiation thermometry transducers
- Thermocouples
- Oscilloscopes
- Voltage regulation circuit
- Biopotential
- Measurements of Wheatstone bridge
- Fission chambers
- Power generator
- Industrial control system