THS4151CDGK
| Parameters | |
|---|---|
| Voltage Gain | 67dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.1mV |
| Settling Time | 53 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 150MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Max I/O Voltage | 7mV |
| Wideband | YES |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 23.303308mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 14.4MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 385mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4151 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Operating Supply Current | 17.5mA |
| Nominal Supply Current | 21mA |
| Power Dissipation | 385mW |
| Slew Rate | 650V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 4.3μA |
| Voltage - Supply, Single/Dual (±) | 4V~33V ±2V~16.5V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 7mV |
| Gain Bandwidth Product | 340MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 150000 kHz |
THS4151CDGK Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Op amps are Differential types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this op amp is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 7mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. Using an 17.5mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 67dB at all times. A total of 1 elements are present in this linear amplifier. It is important to keep the resistance within the 14.4MOhm range of the op amps.
THS4151CDGK Features
8 Pins
supply voltage of 15V
67dB voltage gain
Resistance of 14.4MOhm
THS4151CDGK Applications
There are a lot of Texas Instruments THS4151CDGK Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Large motor controllers
- Multimedia playback equipment
- Oscilloscopes
- High input resistance broadband
- Mobile phone
- Weak signal detection
- Test and measurement instruments
- Weighing systems
- Radiation thermometry transducers
