THS4211DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.71W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4211 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 19mA |
| Nominal Supply Current | 22mA |
| Power Dissipation | 1.71W |
| Slew Rate | 970V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 7μA |
| Voltage - Supply, Single/Dual (±) | 5V~15V ±2.5V~7.5V |
| Output Current per Channel | 220mA |
| Input Offset Voltage (Vos) | 12mV |
| Bandwidth | 350MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1000000 kHz |
| Voltage Gain | 68dB |
| Average Bias Current-Max (IIB) | 20μA |
| Power Supply Rejection Ratio (PSRR) | 58dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 22 ns |
| Low-Bias | NO |
| -3db Bandwidth | 325MHz |
| Programmable Power | NO |
| Max I/O Voltage | 3mV |
| Input Offset Current-Max (IIO) | 6μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4211DGN Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 12mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using a supply current of 19mA , this buffer op amp will be able to operate. Op amp is a member of the 68dB's 68dB family. There are 1 channels on the operational amplifiers.
THS4211DGN Features
8 Pins
supply voltage of 5V
68dB voltage gain
THS4211DGN Applications
There are a lot of Texas Instruments THS4211DGN Instrumentational OP Amps applications.
- Multiplication circuits
- Power control
- Exponential operation circuits
- Computer workstations
- Scintillation detectors
- Comparator
- Ultrasound transducers
- Commercial audio systems
- Hand-held batteries
- Car stereo
