THS4211DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 1.71W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4211 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 19mA |
| Nominal Supply Current | 22mA |
| Power Dissipation | 1.71W |
| Slew Rate | 970V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 7μA |
| Voltage - Supply, Single/Dual (±) | 5V~15V ±2.5V~7.5V |
| Output Current per Channel | 220mA |
| Input Offset Voltage (Vos) | 12mV |
| Bandwidth | 350MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1000000 kHz |
| Voltage Gain | 68dB |
| Average Bias Current-Max (IIB) | 20μA |
| Power Supply Rejection Ratio (PSRR) | 58dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 22 ns |
| Low-Bias | NO |
| -3db Bandwidth | 325MHz |
| Programmable Power | NO |
| Max I/O Voltage | 3mV |
| Input Offset Current-Max (IIO) | 6μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4211DGNR Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the Voltage Feedback-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 8. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 12mV. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 19mA and 10 . Op amp is a member of the 68dB's 68dB family. For the operating supply voltage of the op amp ic, there is a rating of 1. It is used TR to pack the op amps.
THS4211DGNR Features
8 Pins
supply voltage of 5V
68dB voltage gain
THS4211DGNR Applications
There are a lot of Texas Instruments THS4211DGNR Instrumentational OP Amps applications.
- Exponential operation circuits
- E-book readers
- Laptop
- Test and measurement instruments
- Signal filtering
- Industrial control system
- Video computer boards
- Power generator
- Hand-held batteries
- Ultrasound transducers
