THS4222DGK

2 Channels 100mA per Channel 900nA 74 dB Instrumentational OP Amps 5μA 2.7V~15V ±1.35V~7.5V THS4222 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-THS4222DGK
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 318
Description: 2 Channels 100mA per Channel 900nA 74 dB Instrumentational OP Amps 5μA 2.7V~15V ±1.35V~7.5V THS4222 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Weight	23.303308mg
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Max Power Dissipation	385mW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	THS4222
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	14mA
Nominal Supply Current	36mA
Power Dissipation	385mW
Slew Rate	990V/μs
Amplifier Type	Voltage Feedback
Common Mode Rejection Ratio	74 dB
Current - Input Bias	900nA
Voltage - Supply, Single/Dual (±)	2.7V~15V ±1.35V~7.5V
Output Current per Channel	100mA
Input Offset Voltage (Vos)	10mV
Bandwidth	120MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	230000 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	5μA
Power Supply Rejection Ratio (PSRR)	62dB
Low-Offset	NO
Frequency Compensation	YES
Settling Time	25 ns
Low-Bias	NO
Micropower	NO
-3db Bandwidth	230MHz
Bias Current-Max (IIB) @25C	5μA
Programmable Power	NO
Max I/O Voltage	3mV
Input Offset Current-Max (IIO)	0.7μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

THS4222DGK Overview

The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. An op amp ic of the Voltage Feedback type. Linear amplifier is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are located on the operational amplifiers. The input offset voltage is 10mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using an 14mA supply current, this operational amplifier ics can be operated. It is a member of the 100dB's 100dB family. Instrumentation amplifier has 2 channels on it. On the output type, there are Rail-to-Rail different types of op amps.