THS4271DG4
| Parameters | |
|---|---|
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.02W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | THS4271 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 22mA |
| Nominal Supply Current | 24mA |
| Slew Rate | 1000V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 67 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 5V~15V ±2.5V~7.5V |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1400000 kHz |
| Voltage Gain | 68dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 25 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 1.4GHz |
| Programmable Power | NO |
| Max I/O Voltage | 12mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
THS4271DG4 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. This is a Voltage Feedback type op amp. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 8-pin op amp ic is included in the package. There is an input offset voltage of 5mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Operational amplifier can operate supply current at 22mA. There should be no change in the voltage gain. On this buffer amplifier, there are 1 circuits.
THS4271DG4 Features
8 Pins
supply voltage of 5V
68dB voltage gain
THS4271DG4 Applications
There are a lot of Texas Instruments THS4271DG4 Instrumentational OP Amps applications.
- High speed sample
- Test equipment
- pH (acidity)
- Communication device
- Division circuits
- Signal operation
- Switching amplifier
- Wireless base stations
- Radiation thermometry transducers
- High/low-pass filter circuit
