THS4303RGTT
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | THS4303 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Operating Supply Current | 34mA |
| Nominal Supply Current | 48mA |
| Power Dissipation | 2.53W |
| Slew Rate | 5500V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 52 dB |
| Current - Input Bias | 7μA |
| Voltage - Supply, Single/Dual (±) | 3V~5V ±1.5V~2.5V |
| Output Current per Channel | 180mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 1.8 GHz |
| Gain Bandwidth Product | 18GHz |
| Unity Gain BW-Nom | 1800000 kHz |
| Voltage Gain | 5.25dB |
| Power Supply Rejection Ratio (PSRR) | 54dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 24.097095mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1.6MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 1.65W |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
THS4303RGTT Overview
Op amp is packaged in 16-VFQFN Exposed Pad case. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 16. There are a total of 16 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this op amp is a type of Operational Amplifier device. There are 16 pins on this chip. Op amp rates 1.5mV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~85°C. This op amp can operate from a supply current at 34mA. Maintain 5.25dB as the voltage gain. The op amp ic has 1 channels on it. It is used TR to pack the op amps. Instrumentation amplifier resistance should remain within the range of 1.6MOhm.
THS4303RGTT Features
16 Pins
supply voltage of 5V
5.25dB voltage gain
Resistance of 1.6MOhm
THS4303RGTT Applications
There are a lot of Texas Instruments THS4303RGTT Instrumentational OP Amps applications.
- Ultrasound transducers
- Cinema or auditorium audio system
- Active probe
- Blood pressure sensors
- Instrumentation
- Test equipment
- High/low-pass filter circuit
- Precision measurement
- Television
- Weak signal detection
