THS4304DGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 23.303308mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 553mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4304 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 18mA |
| Nominal Supply Current | 18.9mA |
| Power Dissipation | 553mW |
| Output Current | 100mA |
| Slew Rate | 830V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 7μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V ±1.35V~2.5V |
| Output Current per Channel | 140mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 870MHz |
| Unity Gain BW-Nom | 3000000 kHz |
| Voltage Gain | 65dB |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 3GHz |
| Programmable Power | NO |
| Max I/O Voltage | 4mV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4304DGK Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. This is a Voltage Feedback type op amp. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 4mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . This op amp can operate from a supply current at 18mA. Op amp is a member of the 65dB's 65dB family. The op amp is rated for an operating supply voltage of 1.
THS4304DGK Features
8 Pins
supply voltage of 3V
65dB voltage gain
THS4304DGK Applications
There are a lot of Texas Instruments THS4304DGK Instrumentational OP Amps applications.
- Non-polarized electrodes
- Strain gauges
- Video computer boards
- Oscilloscopes
- Industrial applications including automation
- Portable media players
- Fast A/D and D/A converters
- Scintillation detectors
- RF cable systems
- Home audio systems
