THS4500IDGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 23.303308mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4500 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 28mA |
| Power Dissipation | 385mW |
| Slew Rate | 2800V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 4μA |
| Max Input Voltage | -2.7V |
| Voltage - Supply, Single/Dual (±) | 4.5V~15V ±2.25V~7.5V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 370MHz |
| Gain Bandwidth Product | 300MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 300000 kHz |
| Voltage Gain | 54dB |
| Average Bias Current-Max (IIB) | 5.2μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | yeS |
| Voltage - Input Offset | 4mV |
| Settling Time | 8.3 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 30MHz |
| Bias Current-Max (IIB) @25C | 4.6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | -7mV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4500IDGK Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. The input offset voltage is 7mV. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. This op amp can operate from a supply current at 23mA. 54dB should be the voltage gain. There are 1 elements in total in this linear amplifier. Instrumentation amplifier resistance should remain within the range of 10MOhm.
THS4500IDGK Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 10MOhm
THS4500IDGK Applications
There are a lot of Texas Instruments THS4500IDGK Instrumentational OP Amps applications.
- Hand-held batteries
- High/low-pass filter circuit
- Portable media players
- Signal operation
- Broadcasting
- Industrial control system
- ECG equipment
- Test equipment
- Laptop
- Mobile phone
