THS4502CD
| Parameters | |
|---|---|
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 300000 kHz |
| Voltage Gain | 54dB |
| Average Bias Current-Max (IIB) | 5μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Settling Time | 6.3 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 30MHz |
| Bias Current-Max (IIB) @25C | 4.6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | -4mV |
| Input Offset Current-Max (IIO) | 2μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 50kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.02W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | THS4502 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 28mA |
| Power Dissipation | 1.02W |
| Slew Rate | 2800V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 4μA |
| Max Input Voltage | -1.3V |
| Voltage - Supply, Single/Dual (±) | 4.5V~15V ±2.25V~7.5V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 2.4mV |
| Bandwidth | 370MHz |
| Gain Bandwidth Product | 300MHz |
THS4502CD Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Differential-type. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 8 pins. Op amp rates 2.4mV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureA supply current of 23mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 54dB at all times. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. It is recommended to keep the instrumentation amplifier resistance within the range of 50kOhm.
THS4502CD Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 50kOhm
THS4502CD Applications
There are a lot of Texas Instruments THS4502CD Instrumentational OP Amps applications.
- Voltage regulation circuit
- High speed sample
- Inverse/same-phase proportional circuit
- Video conversion and routing
- Tablets
- Displayers for aircraft and air transportation control systems
- E-book readers
- Power transmission
- Gaming industry
- Navigation
