THS4502CDGNR
| Parameters | |
|---|---|
| Base Part Number | THS4502 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 28mA |
| Power Dissipation | 1.71W |
| Slew Rate | 2800V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 4μA |
| Max Input Voltage | -1.3V |
| Voltage - Supply, Single/Dual (±) | 4.5V~15V ±2.25V~7.5V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 370MHz |
| Gain Bandwidth Product | 300MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 300000 kHz |
| Voltage Gain | 54dB |
| Average Bias Current-Max (IIB) | 5μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 6.3 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 30MHz |
| Bias Current-Max (IIB) @25C | 4.6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | -4mV |
| Input Offset Current-Max (IIO) | 2μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 50kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 1.71W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
THS4502CDGNR Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case which makes it easy for the consumer to handle. An op amp of this type is a Differential-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 8 pins that make up the linear amplifier. The input offset voltage is 1mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 23mA and 10 . Voltage gain should remain at 54dB. This linear amplifier has a total of 1 elements. To pack the operational amplifier ics, TR is adopted as the packing method. Linear amplifier resistance should stay within the range of 50kOhm.
THS4502CDGNR Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 50kOhm
THS4502CDGNR Applications
There are a lot of Texas Instruments THS4502CDGNR Instrumentational OP Amps applications.
- Communication
- Non-polarized electrodes
- High speed sample
- Large motor controllers
- Measurements of Wheatstone bridge
- Industrial control system
- Professional videography
- Digital cameras
- Hand-held batteries
- Radiation thermometry transducers
