Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
24.408939mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
50kOhm |
Subcategory |
Operational Amplifier |
Max Power Dissipation |
1.71W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
THS4502 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Operating Supply Current |
23mA |
Nominal Supply Current |
28mA |
Power Dissipation |
1.71W |
Slew Rate |
2800V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Differential |
Common Mode Rejection Ratio |
74 dB |
Current - Input Bias |
4μA |
Max Input Voltage |
-1.3V |
Voltage - Supply, Single/Dual (±) |
4.5V~15V ±2.25V~7.5V |
Output Current per Channel |
120mA |
Input Offset Voltage (Vos) |
2.4mV |
Bandwidth |
370MHz |
Gain Bandwidth Product |
300MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
300000 kHz |
Voltage Gain |
54dB |
Average Bias Current-Max (IIB) |
5.2μA |
Power Supply Rejection Ratio (PSRR) |
72dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
1mV |
Settling Time |
6.3 ns |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
30MHz |
Bias Current-Max (IIB) @25C |
4.6μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Max I/O Voltage |
-4mV |
Input Offset Current-Max (IIO) |
2μA |
Height |
1.1mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
THS4502IDGN Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Differential-type. A Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The buffer op amp includes 8 pins. Op amp ic rates 2.4mV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using a supply current of 23mA , this buffer op amp will be able to operate. Voltage gain should remain at 54dB. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. Op amp resistance should stay within the range of 50kOhm.
THS4502IDGN Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 50kOhm
THS4502IDGN Applications
There are a lot of Texas Instruments THS4502IDGN Instrumentational OP Amps applications.
- earphone
- Television broadcasting equipment
- Navigation
- High speed sample
- Signal filtering
- Communication
- ECG equipment
- Gaming industry
- Cinema or auditorium audio system
- Information processing