banner_page

THS4503CDGK

120mA per Channel 4μA 74 dB Instrumentational OP Amps 5μA 4.5V~15V ±2.25V~7.5V THS4503 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-THS4503CDGK
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 205
  • Description: 120mA per Channel 4μA 74 dB Instrumentational OP Amps 5μA 4.5V~15V ±2.25V~7.5V THS4503 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number THS4503
Pin Count 8
Qualification Status Not Qualified
Number of Elements 1
Operating Supply Current 23mA
Nominal Supply Current 28mA
Power Dissipation 385mW
Slew Rate 2800V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Differential
Common Mode Rejection Ratio 74 dB
Current - Input Bias 4μA
Max Input Voltage -1.3V
Voltage - Supply, Single/Dual (±) 4.5V~15V ±2.25V~7.5V
Output Current per Channel 120mA
Input Offset Voltage (Vos) 1mV
Gain Bandwidth Product 300MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 300000 kHz
Voltage Gain 54dB
Average Bias Current-Max (IIB) 5μA
Power Supply Rejection Ratio (PSRR) 72dB
Low-Offset NO
Frequency Compensation YES
Settling Time 6.3 ns
Low-Bias NO
Micropower NO
-3db Bandwidth 370MHz
Bias Current-Max (IIB) @25C 4.6μA
Programmable Power NO
Dual Supply Voltage 5V
Max I/O Voltage -4mV
Wideband YES
Input Offset Current-Max (IIO) 2μA
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 8
Weight 23.303308mg
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 25kOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Max Power Dissipation 385mW
Terminal Position DUAL

THS4503CDGK Overview


It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called Differential-types. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 1mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . As long as the supply current of the chip does not exceed 23mA, this op amp ic can operate. You should keep the voltage gain at 54dB for the time being. For the operating supply voltage of the op amp ic, there is a rating of 1. It is recommended to keep the buffer amps resistance within the range of 25kOhm.

THS4503CDGK Features


8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 25kOhm

THS4503CDGK Applications


There are a lot of Texas Instruments THS4503CDGK Instrumentational OP Amps applications.

  • Switching amplifier
  • Medical imaging
  • High-frequency data acquisition systems
  • Portable docking station
  • Scintillation detectors
  • Video computer boards
  • Active probe
  • Image computer boards
  • Instrumentation
  • Digital cameras

Write a review

Note: HTML is not translated!
    Bad           Good