banner_page

THS4504DGN

1 Channels 130mA per Channel 4μA 74 dB Instrumentational OP Amps 5.2μA 4.5V~15V ±2.25V~7.5V THS4504 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-THS4504DGN
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: -
  • Stock: 322
  • Description: 1 Channels 130mA per Channel 4μA 74 dB Instrumentational OP Amps 5.2μA 4.5V~15V ±2.25V~7.5V THS4504 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount YES
Number of Pins 8
Weight 24.408939mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 10MOhm
Subcategory Operational Amplifier
Max Power Dissipation 1.71W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number THS4504
Pin Count 8
Qualification Status Not Qualified
Number of Channels 1
Operating Supply Current 16mA
Nominal Supply Current 20mA
Power Dissipation 1.71W
Slew Rate 1800V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Differential
Common Mode Rejection Ratio 74 dB
Current - Input Bias 4μA
Max Input Voltage -2.7V
Voltage - Supply, Single/Dual (±) 4.5V~15V ±2.25V~7.5V
Output Current per Channel 130mA
Input Offset Voltage (Vos) 7mV
Bandwidth 260MHz
Gain Bandwidth Product 210MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 210000 kHz
Voltage Gain 54dB
Average Bias Current-Max (IIB) 5.2μA
Power Supply Rejection Ratio (PSRR) 72dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 4mV
Settling Time 20 ns
Low-Bias NO
Micropower NO
-3db Bandwidth 20MHz
Bias Current-Max (IIB) @25C 4.6μA
Programmable Power NO
Dual Supply Voltage 5V
Max I/O Voltage -7mV
Height 1.1mm
Length 3mm
Width 3mm
Thickness 1.02mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

THS4504DGN Overview


There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 7mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . An 16mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it. 10MOhm is the range in which the instrumentation amplifier resistance should lie.

THS4504DGN Features


8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 10MOhm

THS4504DGN Applications


There are a lot of Texas Instruments THS4504DGN Instrumentational OP Amps applications.

  • MP3
  • Video computer boards
  • Signal amplification
  • Fast A/D and D/A converters
  • Radiation thermometry transducers
  • Semiconductor detectors
  • Industrial applications including automation
  • Large motor controllers
  • Television broadcasting equipment
  • Comparator

Write a review

Note: HTML is not translated!
    Bad           Good