Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
23.303308mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
10MOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Max Power Dissipation |
385mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
THS4505 |
Pin Count |
8 |
Number of Elements |
1 |
Operating Supply Current |
16mA |
Nominal Supply Current |
20mA |
Power Dissipation |
385mW |
Max Supply Current |
17mA |
Slew Rate |
1800V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Differential |
Common Mode Rejection Ratio |
74 dB |
Current - Input Bias |
4μA |
Max Input Voltage |
-2.7V |
Voltage - Supply, Single/Dual (±) |
4.5V~15V ±2.25V~7.5V |
Output Current per Channel |
130mA |
Input Offset Voltage (Vos) |
7mV |
Bandwidth |
260MHz |
Gain Bandwidth Product |
210MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
210000 kHz |
Voltage Gain |
54dB |
Average Bias Current-Max (IIB) |
5.2μA |
Power Supply Rejection Ratio (PSRR) |
72dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
4mV |
Settling Time |
20 ns |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
20MHz |
Bias Current-Max (IIB) @25C |
4.6μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Max I/O Voltage |
-7mV |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
THS4505DGKG4 Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. A Differential-type buffer amplifier is shown here. A Tube case is used for delivering the op amp. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 7mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using an 16mA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 54dB. A voltage rating of 1 is indicated for the op amp's operating supply voltage. Instrumentation amplifier resistance should remain within the range of 10MOhm.
THS4505DGKG4 Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 10MOhm
THS4505DGKG4 Applications
There are a lot of Texas Instruments THS4505DGKG4 Instrumentational OP Amps applications.
- High speed sample
- Biopotential
- Integrator circuits
- Test and measurement instruments
- Switching amplifier
- ECG equipment
- single/dual op amp sum and difference circuits
- High-frequency data acquisition systems
- Ultrasound transducers
- RF cable systems